PRO Z 972 L KW

$12,899.00

  • 35 HP Kawasaki FX1000v (999cc) engine and 16cc Parker HTG transmission
  • 72” triple-7-gauge fabricated steel cutting deck with top, bottom and side reinforcements
  • 3-year limited commercial warranty (no hour limitations)and 5 year / 1,750 hour limited deck construction warranty
Call Us Now

Specs

Engine

  • Engine Brand Kawasaki®
  • Engine Model FX1000v
  • Engine Displacement 999cc
  • Engine Output 35 HP
  • Fuel Tank Capacity Twin 7.45 gal. tanks (14.9 gal. total) with electronic fuel gauge

Drive System

  • Transmission Parker HTG 16cc pump / 310cc wheel motor
  • Forward Speed 14 mph / 22.5 km/h
  • Reverse Speed 7 mph / 11km/h

Cutting Deck

  • Deck Cutting Width 72 in
  • Deck Material fabricated 7ga. (.187in) steel shell
  • Deck Engagement (PTO) electronic fingertip engagement pto
  • Deck Construction 7ga. top plate 7ga. bottom reinforcement ¼” rolled leading edge
  • Spindle Construction 8in sealed cast aluminum housing (maintenance-free)
  • Blade(s) Triple-blade / High-lift blade (standard) Marbain Blade
  • Cutting Height Range 1in – 5in
  • Anti-Scalping 2 Front HD w/ Bushings & Grease Zerk
  • Deck Positions Foot pedal with spring assist 16 Positions

Warranty

  • Warranty 3 year / no hour limit commercial warranty and 5 year / 1,750 hour limited deck construction warranty
  • Deck Shell Warranty 5 year / 1,750 hour limited deck construction warranty
  • Commercial Warranty 3 year / no hour limit commercial warranty

Chassis

  • Frame Fully welded, full-length 3/8 x 5in laser cut steel / integrated tie-down slots
  • Front Axle 2in x 3in solid axle tube with ISO dampening suspension
  • ROPS 2in x 2in spring-latch tool-less foldable 3 position
  • Protection 5/16in Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch
  • Yokes 1/2in thick steel front yokes

Controls

  • Brakes Hand-operated lever with integrated hydro pump release lever
  • Steering Control High Performance & Speed Control

Comfort

  • Seat Type Cushion with seat belt
  • Armrests Padded arm rests
  • Seat Suspension High-back Air-Ride suspension with EVC cushion, ISO mounted base (lateral suspension)
  • Seat Adjustment Angle back adjust and lumbar support

Dimensions

  • Dimensions L/W/H 88in L x 74in W x 52in H
  • Weight (approx.) 1591 lbs.

Additional Specifications

  • Hour Meter Standard electronic
  • Discharge Chute High-density, impact-resistant rubber
  • Cup Holder Intergrated into Side Pod
  • Model Number 53TIHMTY050

Related products